SWG-25 manual bending machine is simple manual bending machine roll forming. Without heating filling sand and other technology. Curved arc smooth, clear, small deformation. Easy to use, easy to carry. Suitable for factories, rural, chemicals, refrigeration, construction, electrical wiring, pipe installation, is a commonly used tool for these industries essential. Bending outside diameter × thickness (mm) Maximum bending angle bending radius Φ 10 × 2.25 ≤ 180 ° 4D Φ 12 × 2.25 ≤ 180 ° 4D Φ 14 × 2.25 ≤ 180 ° 4D Φ 16 × 2.25 ≤ 180 ° 4D Φ 19 × 2.25 ≤ 180 ° 4D Φ 22 × 2.25 ≤ 180 ° 4D Φ 25 × 2.25 ≤ 180 ° 4D manual bending machine, bending machine, SWG-25 manual bending machine, manual bending machine, bending machine two, SWG- 25 manual bender product structure characteristics 1, base 2, frame 3, die 4, 5 wheel bolts 6, positioning block 7, 8 screw, nut 9, the handle 10, 11 sets of handles, rocker panels 12, bolt this machines are mainly composed of 12 separate pieces. Bendable Ф 10, Ф 12, Ф 14, Ф 16, Ф 19, Ф 22, Ф 25, a total of seven kinds of specifications of the pipe, such as a user with special needs can contact the SWG-25 manual bending machine to use with the company first Low Block, one fixed. Select die and rollers according to the desired size elbow. Use the analog-to-head into the low seat shaft and then two sets of brackets into the shaft, then roll into the positioning block 4, with bolts set into fixed. Go to shake the bracket plate 11 to the bent tube is inserted between the die and rollers, adjusting nut 8, so that the die, pipe, wheel fit, you can turn the handle.